Polyend Play - Pattern Mode

124
Polyend Play Manual Rev 1
NOTES
Arrangements & Variations
7
7.1 Pattern Mode
Pattern mode is used to manage the pattern selection including chaining
and playing selected pattern sequences. Pattern mode offers control over
the entire set of 128 patterns, where each of the 8 x 16 grid buttons
represent an individual pattern in a project. The [Patterns] button toggles
between Pattern mode and the default Sequencing mode.
Orange. Currently active / loaded pattern.
Pattern Mode - 8x16 Grid Pad Colours
Dim Green. Empty Pattern.
Blue. Available Patterns.
Flash Orange / Blue. Pattern pending to play next when manually triggered.
Fill
Delete
Reverb Send
Delay Send
Note
Microtune
Master Volume
Limiter
Save
Reset
Overdrive
Bit Depth
Volume
Panning
Tempo
Swing
View
Master FX
Repeat Type
Repeat Grid
Filter Cutoff
Resonance
Track Length
Play Mode
Patterns
Audio/MIDI
Chance
Action
Sample
Folder
Copy
Paste
Randomize
Randomize Type
Sample Start
Sample End
ShiftMove
Micromove
Mute
16
Solo
32
Variation
48
Sample Attack
Sample Decay
Select
64
Fill
Delete
Reverb Send
Delay Send
Note
Microtune
Master Volume
Limiter
Save
Reset
Overdrive
Bit Depth
Volume
Panning
Tempo
Swing
View
Master FX
Repeat Type
Repeat Grid
Filter Cutoff
Resonance
Track Length
Play Mode
Patterns
Audio/MIDI
Chance
Action
Sample
Folder
Copy
Paste
Randomize
Randomize Type
Sample Start
Sample End
ShiftMove
Micromove
Mute
16
Solo
32
Variation
48
Sample Attack
Sample Decay
Select
64
Press [Patterns] to access the Pattern Mode.
Each [Pad] Represents an individual pattern. A
maximum of 128 patterns are available per project
Tap [Pad] to select or
create a new pattern
16
17
128113
97
Leave a blank pad to
signal end of a chain
Press [Play] to play and
loop the current pattern
Press [Shift] + [Play] to play
a pattern sequence
Playback of a pattern sequence will start on the
selected pattern, play through adjacent patterns
until no more patterns are in the sequence and
then restart from the rst pattern in the sequence.
Pattern 114