Polyend Play - 3.6 Copy; Paste Steps Page and Tracks

38
Polyend Play Manual Rev 1
Projects & Tracks
3
NOTES
3.6 Copy / Paste Steps Page and Tracks
Track length can be up to 64 steps managed across 4, 16 step pages.
Extending length only affects empty steps but the note steps can be copied
from one page to another if required. Tracks and their steps and
parameters can also be copied.
▌ COPYING A TRACK STEP PAGE
1. In sequence mode hold [Shift] to view the active and selected step
pages for each track.
2. To copy a track step page, Keep Hold [Shift] + [Pad] for the step page to
copy. The pad will be one of the 4 right side pads lit green.
3. While still holding [Shift] + [Pad] for the source page, Tap [Pad] for the
destination page to copy into. This pad will be one of the other 4 right
side pads lit green.
4. All of the steps from the source page will be copied to the destination.
Pages can be copied across pages on the same track or onto other
pages of other tracks.
▌ COPYING ENTIRE TRACKS
1. Press the [Select] Pad for the track to select. Tracks represented by grid
pad rows. Multiple tracks can be selected. Bright green pads for audio
and bright violet for MIDI Mode indicate selected tracks.
2. To copy the selected tracks, press [Copy].
3. Deselect any selected tracks. Press the [Select] Pad for any selected
tracks to deselect it. Dim green / violet indicates unselected tracks.
4. Press the [Select] Pad for the destination track row to copy into.If
multiple tracks were copied they will be pasted in the same order below.
5. Press [Shift] + [Paste]. The source tracks including notes and
parameters will be copied. Any existing note and parameter data is
overwritten when pasting. Copying between Audio and MIDI tracks is
possible.
Quick Copy: Note that quick copy can operate for steps, step pages, Patterns and
Variations. Quick copy is performed by keep holding the source [Pad] for about half a
second + Press [Pad] for any destination pads. Pads will ash blue twice when
copied to the clipboard and when pasted.