Polyend Play - 4.8 Sample; Folder

59
Polyend Play Manual Rev 1
NOTES
Parameter Summary
4
4.8 Sample / Folder
Description Description
Range / Options
Other Information
Range / Options
Other Information
Primary Parameter Secondary Parameter
The sample that is selected and used
as a steps sound source. Typically
would be set in the work step then
placed on the grid.
The sample pool folder from which to
select a sample.
All samples will be available from the
sample pool folder selected
Sample format will be set within the
internal sample engine automatically.
Samples must be copied to the
sample pool to be accessible.
All folders in the sample pool will be
available for selection unless a folder
is empty. If a folder is empty it will not
be visible for selection.
Samples and folder must be created
or transferred to the sample pool to
be selectable. The folder structure
and names are critical to some of
Play’s advanced options. Sample
pack format is preferred.
Sample Folder
Sample
ClosedHat2
Hats
LoFi Drone Pattern 5
Folder
Live Rec Play Perform
MIDI Mode MIDI Mode
The MIDI Channel is selected by
the Sample knob when in MIDI
mode. The channel is also assigned
with the specic Jack or USB Port.
The Resonance parameter knob
changes to control PC Messaging in
MIDI Mode. Program Change
messages change the preset or bank
on a destination device.