Polyend Play - Page 18

18
Polyend Play Manual Rev 1
Overview
1
1.10 Quick Reference Commands
Function Action
Play Buttons
Description
Sequence Copy Step Hold [Pad] on existing step Hold until step ashes to copy to clipboard. Sequencer mode.
Sequence Quick Copy/Paste Hold [Pad] A + [Pad] B Copies Step A and pastes to Step(s) B. Sequencer mode.
Sequence Select Step Range Hold [Shift] + [Pad] A then [Pad] B
Selects a range of steps across tracks using a selection
rectangle where pads refer to diagonally opposite corners.
Keep shift and rst pad held. Set in Sequencer mode.
Sequence Select Multiple Steps Hold [Shift] + [Pad] A , [Pad] B etc
Selects multiple steps with individual selections. Keep shift
held then select pads. Set in Sequencer mode.
Sequence Live Recording Press Live Rec [Screen] Button
Selects live recording mode. Notes played by MIDI, View
Keyboard and parameter changes are recorded. Play the
sequence to start recording to the pattern.
Sequence View Mode Press [View]
Switches the last four column from function mode to view
mode. Notes can then be played in like a virtual MIDI
controller. Mode can be set in congurations.
Sequence Piano Roll Hold [View] Presents the pads as a piano roll.
Sequence Transpose View Press [Pad] Col 17, 18, 19, 20.
In view mode, the top row of function pads can transpose the
view keyboard octave range.
Sequence Fill Steps Press [Fill] - Type/Density - [Fill]
The Fill command will populate a set of selected steps or
tracks based on the type and density parameters.
Track Select Track Press Select [Pad] - Column 20
Each select pad will select the track, represented across the
pad grid rows. Tracks selected will also select steps.
Track Mute Track Press Mute [Pad] - Column 17
Each Mute pad will silence one of the 8 tracks. Tracks are
presented as pad rows.
Track Solo Track Press Solo [Pad] - Column 18
Each Solo pad will solo one of the 8 tracks. Tracks are
presented as pad rows.
Track Track Variation Press Variation [Pad] - Column 19
Each Variation pad will view the track variations represented
across the pad grid rows. Variations can be selected.
Track Track Length Turn (Track Length)
Adjusts the number of steps in the selected tracks between
1-64 steps.
Track View Step Pages Hold [Shift]
Views the available step pages on the function pad buttons.
First row 1-16, second 17-32 etc, labelled under pads.
Track Select Step Pages Hold [Shift] + Function [Pad]
Pads on each row represents available step pages for each
track. The page can be selected which displays the selected
steps on the 8 x 20 grid pad layout.
Track Quick Length Edit Hold [Shift] + Function [Pad]
Pads on each row represents available step pages for each
track. Selecting the page will automatically extend the steps.
Track Copy Step Page Hold [Shift] + [Pad] A then [Pad] B
Hold the function pad for the page to copy. While still holding
shift & pad, press the pad for the page to copy into.
Track Copy Tracks Press [Copy]
Select tracks to copy then press copy. Pasting into a selected
audio or MIDI track will paste with the same track order.
Track Export Tracks Press (Screen)
Select the main menu and the le submenu. Several export
options are available.
Pattern Pattern Mode Press [Patterns]
Selects between sequencer and pattern modes. Pattern
mode enables management and chaining of all patterns.
Pattern Select Pattern Press [Pad]
The 8 x 20 grid pads represent pattern slots. Patterns for
editing in sequencer view can be selected here.
Pattern Quick Copy/Paste Hold [Pad] A + [Pad] B
Copies Pattern A and Pastes to Pattern Slot (s) B. Pattern
mode must be on.