76
Polyend Play Manual Rev 1
NOTES
Samples
5
▌ CREATING OR RENAMING SAMPLE POOL FOLDERS
1. Ensure the project in which to work is open and active.
2. Press (Screen) knob to open the options menu.
3. Turn (Screen) to navigate the menu options. The menu may display the
position level previously navigated. If required, Press [Back] screen
button to back up through the menu hierarchy.
4. Highlight the ‘Samples’ option and press (Screen) to select.
5. Highlight the ‘View Sample Pool’ option and press (Screen) to select.
6. The list of sample pack folders will be displayed, named in the Play
convention style. Press (Screen) and [Back] to navigate within the folder
structures.
7. To edit:-
• To add a new folder, scroll through to the bottom of the folder
structure by turning (Screen). Highlight ‘<Add New Folder> and
Press (Screen).
• To rename an existing folder, scroll through to highlight the folder to
edit by turning (Screen). Highlight the target folder and Press
[Rename] Screen Button.
8. The text editor pop-up will appear to name or rename the folder.
9. Once a name has been set for the folder, press left [Conrm] screen
button to accept the name and create or rename the folder. The
maximum number of folders is 20 per sample pack. Empty sample pool
folders will not be visible when using the (Sample) knob for sample
selection.
▌ AUDITIONING SAMPLES WITHIN THE BROWSER MENU’S
1. To audition a sample when highlighted, Press (Screen) or Press one of
the left side [Screen] buttons. The samples sound will be played out.
2. When browsing, Hold (Screen) or one of the [Screen] Left buttons while
turning (Screen) and scrolling samples. This is usually performed easier
and quicker by Holding [Screen] Left Button + Turn (Screen).
To Next Page
Loading...
