Polyend Play - Page 98

98
Polyend Play Manual Rev 1
NOTES
Sequencing Patterns
6
There are some recording parameters than can be congured in the main
menu settings. These are Quantize recording which quantizes any played
notes to the step division and the scale selected. Overdub recording which
determines if existing data is retained or overwritten.
▌ ADJUSTING LIVE RECORDING SETTINGS
1. Press the (Screen) Knob to open the main menu.
2. The previously selected menu location will be displayed. If not the main
menu is not in view, use [Back] to navigate up the menu structure.
3. At the main menu level, highlight ‘Settings’ by turning (Screen). Press
(Screen) to select the sub menu for settings.
4. Turn (Screen) to navigate the settings menu and to highlight the desired
option.
5. For recording options choose Quantize Recording or Overdub
Recording. When highlighted, Press (Screen) to show the options.
6. Both settings have the option to be turned ‘On’ or ‘Off’. Defaults is off.
7. Turn (Screen) to highlight and choose between ‘Off’ and ‘On’. Press
(Screen) to conrm the selection.
Setting Option Menu Option Description
Quantize Recording Settings
Off
Will allow natural note placement with
variable micro moves applied to establish
the adjustment as played in position.
Default setting.
On
Will record note placement with xed
micro move setting applied to establish a
more rigid grid sequence.
Overdub Recording Settings
Off
Retains existing notes that already exist
on steps. Records new notes into freely
available steps. Existing notes are
retained and new notes recorded ignored
for a step with an existing note.
On
Overwrites existing notes by any recorded
new notes. Existing notes are replaced by
any new note recorded onto the step and
empty steps recorded with the note.