THE ART OF WELDING
P6
PN-0509076 Rev. 16 11-92
Introduction3.
The P4-P6 P6 HW series3. 1.
The P6 belongs to a new series of universal and functional power sources for orbital TIG welding. The complete
realisation of a weld is the result of applying a WP (Weld Procedure), containing one or more programs when
several passes are necessary, documentation for preserving information about the weld, such as preparation
of the tubes, electrode diameter and grinding angle, workpiece/ electrode distance, wire diameter and feeding
angle etc.
The WP also assists the operator fi nding a successful solution of the weld problem. Particular features of the
power source P6 are:
The welding sequences are completely programmable in the operator’s language.•
The handling is simple and easy to learn because of the intuitive programming concept.•
Built-in library of WPs for fast weld parameter search.•
A measurement data acquisition system.•
An integrated printer for archiving and documentation to ISO 9000.•
WPs can be stored on internal memory or on a USB key.•
Modern power sources using inverter-technology.•
Mechanised welding can be carried out with all the convenience of the P4-P6 series power sources.•
Features of the P4-P6 P6 HW power sources:
DC or pulsed weld current can be supplied.•
Continuous or pulsed movement and continuous or pulsed wire feeding in synchronisation with the weld •
current.
To Next Page
Loading...
