Polysoude P6 - Tube to Tubesheet Welding Heads and Accessories; Tube to Tubesheet Welding Heads: TS Series; Accessories: POLYFIL-3 Wire Feeder

THE ART OF WELDING
P6
PN-0509076 Rev. 16 17-92
The tube to tubesheet welding heads3. 2. 3.
TS welding heads to meet sought-after produc-•
tivity and quality requirements.
TS 25, standard welding head for tube to tube •
sheet.
Closed welding head, designed for slightly pro-
truding or fl ush tubes.
TS 34 (Fig.3.7), standard welding head for tube •
to tube sheet particularly designed for high duty
cycle applications.
Closed welding head for slightly protruding or
fl ush tubes.
TS 2000 (Fig.3.8) and TS 8/75 (Fig3.9), stand-•
ard welding head for tube to tubesheet applica-
tions.
Open weldhead for protruding, fl ush or recessed
tubes.
Accessories3. 2. 4.
POLYFIL-3 (Fig.3.10) external wire feeder.
Wire feeder with four-roller linear drive system to
minimise wire deformation and damage to wire
surface.
Fig. 3.7 - TS 34 welding head
Fig. 3.8 - TS 2000 welding head
Fig. 3.10 - Polyfi l-3 wire feeder
Fig. 3.9 - TS 8/75 welding head