Polysoude P6 - Programmed Welding Parameters Reference; Gas Axis Parameters

THE ART OF WELDING
P6
PN-0509076 Rev. 16 81-92
List of programmed welding parameters7. 2.
Gas axis
Function Wording Ref. Min. Max. Unit Increment Default
Prepurge time Pregas time T10 1.0 999,0 s 0.1 10.0
Postpurge time Postgas time T11 1.0 999,0 s 0.1 10.0
Oxygen fl ow rate control
Oxygen
threshold
L10 1.0 206400 ppm 0.1 50.0
Current axis
Function Wording Ref. Min. Max. Unit Increment Default
Ignition current Ignition current I20 5 300 A 1 25
Prefusion ramp time Ramp time T20 0 9999 s 1 0
High current High current I22 5.0 300.0 A 0.1 10
High current time Pulse time high T22 0 or 10 3000 ms 1 100
Low current Low current I23 5.0 300.0 A 0.1 5
Low current time Pulse time low T23 0 or 10 3000 ms 1 100
Start of downslope Start downslope N20 361 9999 ° 1 365
Downslope time Downslope time T25 0.1 60.0 s 0.1 3.0
Arc cut-off current
Arc cut-off
current
I25 5 300 A 1 5