THE ART OF WELDING
P6
2-92 PN-0509076 Rev. 16
Revisions of the document
Rev. 0 Translation of the original document
Rev. 1 Up-dating due to new 6-axes version
Rev. 2
Update after a report of non-conformity and product evaluations;
sub-points § 7.2 and § 7.3 are added to the section “Adjustment of the
tachometer”
01/2011
Rev. 3
Update “Start cycle with restart” and “Fuses coolant pump control»
09/2011
Rev. 4 Update “Option commands mechanised equipment» 11/2011
Rev. 5
Update: FNCA 1201-039 and FNCA 1201-019 – Items on pages 56 to 59 –
Fuse § 6.2.2 and on page 46, Shunt for UHP welding heads on page 23,
gas values on page 20.
02/2012
Rev. 6
Addition of chapters: Connecting the measuring unit, Adjusting the measu-
ring card, Compatibility of standard equipment.
Changes to pictures of the P6 power source.
03/2012
Rev. 7 Addition chapter 4.5.3 Quick connector gas input
Addition chapter Setting oxygen meter
06/2012
Rev. 8 Addition adapter manual torch and remote control 4 axis. 10/2012
Rev. 9
Addition "Settings oxygen meter confi guration" "IP Address", updates
chapters "Making adjustments during a weld cycle" and "Error and codes
processing"
11/2012
Rev. 10
Modifi cation touchscreen controller, addition chapter remotes control on
board
03/2013
Rev. 11 Addition manual torch adapter 0023000901 and ref remote control 04/2013
Rev. 12 Using the remote control to regulate the AVC 10/2013
Rev. 13 Update part list of the power source 01/2014
Rev. 14 Update touchscreen (09/2013) 02/2014
Rev. 15 Update part list remote control 06/2014
Rev. 16 Update : " Servicing" 08/2014
If this technical manual is to be printed, both sides of the page must be used to improve under-
standing and readability.
This manual must be delivered to users.
Product
Reference
Manual
Redactor
P6 mobile power source
0025059101/0025059103/0025059104/0025059105
PN-0509076
SBR
To Next Page
Loading...
