Powerware 9330 - Page 149

12--7
Powerware 9330 (10 kVA--40 kVA) Installation and Operation
164201300 Rev . N 013004
NOTICES
Message IndicationLogRelayPhoneHorn
Calling Phone #2 2 No 2 HA Information Only
Calling Phone #2 OK Off No 2 HA Condition Cleared
Calling Phone #3 2 No 2 HA Information Only
Calling Phone #3 OK Off No 2 HA Condition Cleared
Calling Phone #4 2 No 2 HA Information Only
Calling Phone #4 OK Off No 2 HA Condition Cleared
Check EPO Reset 2 No 2 A User Instruction
Check Modem 2 No 2 A User Instruction
Close Battery 3 No 2 HA User Instruction
Close Battery OK Off No 2 HA Condition Cleared
Discharging Battery 2 No 2 HA Information O nly
Discharging Battery OK Off No 2 HA Condition Cleared
Emergency Transfer To Bypass 2 No 2 A Protection Level
Input Over Frequency 2 No 2 HA Information Only
Input Over Frequency OK Off No 2 HA Condition Cleared
Input Under Frequency 2 No 2 HA Information Only
Input Under Frequency OK Off No 2 HA Condition Cleared
Input O ver Voltage 2 No 2 HA Information Only
Input O ver Voltage OK Off No 2 HA Condition Cleared
Input Under Voltage 2 No 2 HA Information O nly
Input Under Voltage OK Off No 2 HA Condition Cleared
Inverter Initializing No No 2 A Information Only
Maintenance Bypass Off 2 No 2 HA Protection Level
Maintenance Bypass On 2 No 2 HA Protection Level
Output Over Frequency 2 No 2 HA Information O nly
Output Over Frequency OK Off No 2 HA Condition Cleared
Not Enough UPMS 1 No 2 A Information Only
Not Enough UPMS OK Off No 2 A Condition Cleared
Output Under Frequency 2 No 2 HA Information Only
Output Under Frequency OK Off No 2 HA Condition Cleared
Output Over Voltage 2 No 2 HA Information Only
Output Over Voltage OK Off No 2 HA Condition Cleared
Output Under Voltage 2 No 2 HA Information O nly
Output Under Voltage OK Off No 2 HA Condition Cleared
Phone #1 Failed 3 No 2 A Information O nly
Phone #2 Failed 3 No 2 A Information O nly
Phone #3 Failed 3 No 2 A Information O nly
Phone #4 Failed 3 No 2 A Information O nly
SBM IO 1 Not Reporting 1 No 2 A Information Only
SBM IO Not Reporting OK Off No 2 A Condition Cleared