Precor Experience Series 800 line EFX - Page 101

1. Remove the Drive Access cover see "Drive Access Cover Replacement" on page56.
2. Remove the left and right drive disk covers, see "Drive Disk Covers Replacement" on
page57.
3. Remove the left and right Stairarms and Drive Housing covers see "Drive Housing
Covers Replacement" on page59.
4. Use a 1/2" socket to loosen the two Drive Components Assembly fastener nuts (left
side). Do not remove the fastener nuts.
5. Use a 1/2" socket to loosen first stage belt tensioner and walk the first stage drive belt off
the pulleys. Remove the first stage drive belt. Retain belt for installation.
Experience Series 800 Line EFX
94
5 Replacement Procedures
Cranks and Input Bearing Assembly Replacement