Precor Experience Series 800 line EFX User Manual

6. Use a 9/16" socket to remove the four fasteners (bolts and washers) and remove the
Cranks and Input Bearing Assembly. Discard the four bolt fasteners, the bolt cannot be
reused for installation. Retain washers for installation.
CAUTION:Do not reuse the Crank and Input Bearing Assy Nylok patch bolt fasten-
ers for installation. Discard the bolts and order new bolts for installation.
Experience Series 800 Line EFX
95
5 Replacement Procedures
Cranks and Input Bearing Assembly Replacement

Precor Experience Series 800 line EFX Specifications

General

Brand	Precor
Model	Experience Series 800 line EFX
Category	Elliptical Trainer
Language	English