Precor Experience Series 800 line EFX User Manual

3. Use a 9/16" socket to remove the Linkarm fastener. Remove the Linkarm and Inner Link-
arm cover.
4. Use a 3/16" hex wrench to remove the Moving Arm Pivot Shaft inner set screw and
loosen the outer set screw. Remove the Moving Arm from the pivot shaft mount. Retain
fastener hardware for installation.
5.
Installation Instructions
Experience Series 800 Line EFX
115
5 Replacement Procedures
Moving Arms Replacement

Precor Experience Series 800 line EFX Specifications

General

Brand	Precor
Model	Experience Series 800 line EFX
Category	Elliptical Trainer
Language	English