Precor Experience Series 800 line EFX User Manual

P62, P80, and P82 consoles:
Access Club Settings (5,6,5,1,5,6,5) > Maintenance menu > Maintenance Reminder >
select ON or OFF.
Viewing the current ASL state
The current ASL state (solid blue, pulsing blue, solid yellow; or pulsing yellow) can be viewed
using the service menu ACTIVE STATUS LIGHT parameter.
P10, P20, and P30 consoles:
Access Hardware Validation (5,1,7,6,5,7,6,1) > ACTIVE STATUS LIGHT > current ASL
state.
P62, P80, and P82 consoles:
Access Club Settings (5,6,5,1,5,6,5) > Maintenance menu > ACTIVE STATUS LIGHT >
current ASL state.
Viewing the ASL maintenance counter remaining miles (or hours)
The maintenance counter remaining miles or hours to zero can be viewed in the service menu.
P10, P20, and P30 consoles:
Access Information Display (6,5) > MAINT COUNTER > remaining miles (or hours_ to zero.
P62, P80, and P82 consoles:
Access Club Settings (5,6,5,1,5,6,5) > Maintenance menu > Next Maintenance Due >
remaining miles or hours to zero.
Clearing the Blue Pulsing ASL State (Maintenance Counter reset)
Resetting the maintenance counter clears the ASL blue pulsing state and resets the ASL state
to solid blue.
P10, P20, and P30 consoles:
1. Access Information Display (6,5) > select MAINT COUNTER > OK.
2. Press/Hold the QUICKSTART key, the "HOLD TO RESET MAINTENANCE
COUNTER" message will show, continue holding down QUICKSTART for 3 sec until
the maintenance counter is reset to [[[Undefined variable TRM700-
16Base.MaintCounter]]].
P62, P80, and P82 consoles:
Access Club Settings (5,6,5,1,5,6,5) > Maintenance menu > Next Maintenance Due >
Reset.
Experience Series 800 Line EFX
137
6 Troubleshooting
Active Status Light (ASL)

Precor Experience Series 800 line EFX Specifications

General

Brand	Precor
Model	Experience Series 800 line EFX
Category	Elliptical Trainer
Language	English