Precor Experience Series 800 line EFX - Page 46

8. Use a 1/2" socket to tighten the two Generator and Eddy Brake Assembly fasteners (left
side), torque fasteners to [[[Undefined variable EFX800-16Base.spec-
DriveAssyBolts]]].
9. Reinstall the left drive disk cover, see "Drive Disk Covers Replacement" on page57.
10. Reinstall the Drive Access Cover, see "Drive Access Cover Replacement" on page56.
11. Verify machine operation and return to service.
See Also
"First Stage Drive Belt Tension Adjustment" on page32
Experience Series 800 Line EFX
39
4 Adjustment Procedures
Second Stage Drive Tension Adjustment