Precor Experience Series 800 line EFX - Page 73

the stairarm onto the crankarm spindle.
b. Reinstall the pivot block retaining ring.
c. Reinstall the Crankarm Retention Plate and secure with a new Nylok patch
fastener. Torque to [[[Undefined variable Specifications.EFX16-Crank-
armRetentionPlate]]].
CAUTION:Do not reuse the removed Retention Plate Nylok patch bolt
fasteners for installation. Discard the removed bolts and order new
bolts for installation.
d. Reinstall the outer Pivot Block cover and secure with the #2 Phillips screw
fastener.
6. Reinstall the left and right drive disk covers, see "Drive Disk Covers Replacement" on
page57.
7. Reinstall the drive access cover, see "Drive Access Cover Replacement" on page56.
8. Verify the machine operation and return to service.
Experience Series 800 Line EFX
66
5 Replacement Procedures
Covers and Panels Replacement