Precor Experience Series 800 line EFX User Manual

4.
Reinstall the ramp-to-drive transition cover . Press on cover to securely lock tabs in
place.
5. Reinstall the left and right stairarms.. Repeat procedure for the left and right stairarms.
a. Make sure the pivot block inner flat washer and wave washer are installed in the
order shown on the crankarm spindle (flat washer then wave washer). Then slide
Experience Series 800 Line EFX
65
5 Replacement Procedures
Covers and Panels Replacement

Precor Experience Series 800 line EFX Specifications

General

Brand	Precor
Model	Experience Series 800 line EFX
Category	Elliptical Trainer
Language	English