Precor Experience Series 800 line EFX User Manual

Installation Instructions
1. Install the first stage drive belt by walking the belt onto the Input drive and smaller first
stage drive pulleys. Adjust the First Stage Tensioner enough to hold the tensioner and
belt in place. Rotate the crank and make sure that the belt is properly aligned and
seated in the pulley grooves.
Experience Series 800 Line EFX
69
5 Replacement Procedures
First Stage Drive Belt Replacement

Precor Experience Series 800 line EFX Specifications

General

Brand	Precor
Model	Experience Series 800 line EFX
Category	Elliptical Trainer
Language	English