1-5
6.7.9 MEAS:PCYCle? 6-113
6.8 LIMit Command 6-114
6.8.1 LIMit:FREQ:LOW? 6-114
6.8.2 LIMit:FREQ:HIGH? 6-114
6.8.3 LIMit:VOLT:LOW? 6-114
6.8.4 LIMit:VOLT:HIGH? 6-114
6.8.5 LIMit:POWer? 6-114
6.8.6 LIMit:CURR 6-115
6.8.7 LIMit:POWer 6-115
6.9 COMM Command 6-115
6.9.1 COMM:ERR? 6-115
6.10 Communication Example 6-116
6.10.1 Remote Control 6-116
6.10.2 Read Device Information 6-116
6.10.3 Phase Angle Control 6-116
6.10.4 General Mode 6-117
6.10.5 Step Mode 6-117
6.10.6 Gradual Mode 6-118
6.10.7 Three-Phase Independent Output Mode 6-118
6.10.8 Read Measurement Data 6-119
6.10.9 Limit Current Settings 6-119
6.11 System Error Code Description 6-119
6.11.1 System Error Code 6-119
7 Calibration 7-121
7.1 Voltage Calibration 7-122
7.2 Current Calibration 7-123
7.3 Power Calibration 7-124
8 Maintenance 8-125