AFV
+
Series High Power Programmable AC Power Supply
3-67
3.7.2 RS-232 / GPIB Setting Page
Press the item to switch the communication interface to
RS-232/GPIB.
Figure 3.46 RS-232/GPIB settings
The descriptions for the items and the icons in the above figure are given as follows.
：Switch the communication interface to RS-232/GPIB.
：The protocol is fixed by default to SCPI.
：The communication address can be set within the range
of 1-32. Refer to the figure below.
Figure 3.47 Communication address setting
To Next Page
Loading...
