Preen AFV+ Series - 6.5.1 INST:COUPling; 6.5.2 INST:PHASe; 6.6 OUTPut Command; 6.7 MEASurement Command

AFV
+
Series High Power Programmable AC Power Supply
6-111
6.5.2 INST:PHASe
Function Description：Setup phase angle for three-phase model
Command Description：INST:PHASe 0,240,120\r\n
Parameter1：U phase angle (U phase reference angle defaults to 0, do not change)
Parameter2：U-V phase angle
Parameter3：U-W phase angle
Answer Command：None
6.6 OUTPut Command
6.6.1 OUTPut
Function Description：Start/Stop output command for power source
Command Description：OUTPut 0|1\r\n
Parameter1：Output status (1—Start Output, 0—Stop Output)
Answer Command：None
6.6.2 OUTPut?
Function Description：Query output status of power source
Command Description：OUTPut？\r\n
Answer Command：OUTPut 0|1\r\n
Parameter1：Output status (1—Start Output, 0—Stop Output)
6.7 MEASurement Command
6.7.1 MEAS:MODE
Function Description：Setup the measurement mode
Command Description：MEAS:MODE OUT\r\n
Parameter1：Measurement mode (OUT- Output Side)
Answer Command：None