AFV
+
Series High Power Programmable AC Power Supply
2-25
2.3.3 Input & Output Wire Selection
Care must be taken to properly select wire size for the input and output of AFV
+
series according to its models; refer to Figure 2.7, Figure 2.8 and Figure 2.9.
For input/output connection, please remove the front door of the product enclosure
which is fixed via screws. Please refer to Chapter 2.4 & 2.5 to connect the terminals
of AC input and AC output which are inside the front door with the cables. For safety
requirement, ensure that the product and the DUT are switched off before
connection, and screw the front door back after all connections is completed.