AFV
+
Series High Power Programmable AC Power Supply
6-108
6.3.8 SOUR:STEP:LOAD
Function Description:Setup all STEP data to controller MCU.
Command Description:SOUR:STEP:LOAD\r\n
Answer Command:None
Note
:
The command is optional.
6.3.9 SOUR:GRAD:VOLT
Function Description:Setup output voltage in Gradual Mode
Command Description:SOUR:GRAD:VOLT 1,110.0,220.0r\n
Parameter1:Group(1-12)
Parameter2:Gradual start voltage of the group
Parameter3:Gradual end voltage of the group
Answer Command:None
6.3.10 SOUR:GRAD:FREQ
Function Description:Setup output frequency in Gradual Mode
Command Description:SOUR:GRAD:FREQ 1,50.0,60.0r\n
Parameter1:Group(1-12)
Parameter2:Gradual start frequency of the group
Parameter3:Gradual end frequency of the group
Answer Command:None
6.3.11 SOUR:GRAD:TIME
Function Description:Setup time interval in Gradual Mode
Command Description:
Mode 1:
1 Hour, 1 Minute, 10.0 Second:
SOUR: GRAD:TIME 1,1:1:100\r\n
Mode 2:
1 Hour, 1 Minute, 10.00 Second:
SOUR: GRAD:TIME 1,1:1:1000\r\n
Answer Command:None