Dangerous high voltages exist inside this machine. Do not open any covers of this
machine unless authorized and done by trained technicians. Otherwise, electrical
shock to persons may happen.
In case the machine needs to be moved or re-wired, all electricity to the machine
must be disconnected and removed. After electricity is removed, please wait for at
least 20 minutes before touching any live parts of this machine or electrical shock
may occur: the electrical charges on the bulky capacitors inside the machine need
some time to be fully discharged.
For optimal safety protection to the users, this machine must have solid
connections to the earth. Do not use this machine if it is not grounded.
In case of fire, use an extinguisher with powder chemicals instead of liquid agents.
Electrical shock may occur if liquid extinguishing products are used.
Any foreign objects and/or liquid are strictly prohibited from entering to the inside
of this machine.
Storage and operating environment have a certain degree of influence on the life
and reliability of this product. Therefore, avoid placing and/or operating this
machine in environments with the following:
(a) Having extreme ambient temperature or humidity that exceeds the allowable limit
stated in the specification, temperature: 0℃-45℃, humidity: 0-90%.
(b) Having direct sunlight exposure, or being near a heat source.
(c) Places that tend to be vibrated or hit by other objects.
(d) Having heavy dust, heavy salt, corrosive chemicals or inflammable chemicals in the
air.
Please keep air ventilation inlets and outlets clear and clean. Obstruction on the
inlet or outlet will have significant negative impact on the machine’s quality and
reliability.
If the machine will not be used for a long time, please store it in a dry and clean
environment with temperature in the range of -40℃-+70℃.
This machine is composed of many delicate and precision devices. Please do not
open any covers of this machine unless authorized and done by trained technicians.
Warranty is voided if the quality seal is broken.
To Next Page
Loading...
