Value range: 1 minute, 2 minutes, 3
minutes, 4 minutes, 5 minutes, 10 minutes,
15 minutes, 30 minutes, 60 minutes
Auto Power Off Time (Fn202)
Sets the time that will elapse before the
power is turned off automatically after the
standby mode is entered.
Value range: 1 hour, 2 hours, 3 hours, 4
hours, 8 hours, 12 hours, 18 hours, 24
hours
Specifies the printing preparations when the
standby mode is switched from the sleep
mode.
[On]: Silent due to no preparation for
printing.
[Off]: The image drum makes a noise as it
prepares for printing, facilitating a faster
speed for the first printing start time.
Sets the timing to clear the recoverable
error display.
Sets whether or not to automatically restore
this machine when a memory overflow or
tray request occurs.
Sets the waiting time for loading the paper
when you print with [Feed paper individually]
checked in the printer driver.
Value range: Off, 30 seconds, 60 seconds
Sets the time from loss of the data receipt
(canceled by PostScript) until force-printing.
Value range: Off, 5 seconds, 10 seconds,
20 seconds, 30 seconds, 40 seconds, 50
seconds, 60 seconds, 90 seconds, 120
seconds, 150 seconds, 180 seconds, 210
seconds, 240 seconds, 270 seconds, 300
Seconds
Sets the time to keep each port open after
printing. (Except for network)
The value range is from 0 to 300 seconds in
increments of 5 seconds.
Sets the time to keep the network port open
after printing.
The value range is from 0 to 300 seconds in
increments of 5 seconds.
Sets the action of this machine when [Toner
Low] is displayed.
This machine goes offline when [Stop] is
selected.
Print Mode w/o Color Toner
Specifies the action when there is an empty
color toner cartridge.
[Alarm]: This machine stops without printing
the color print data.
To Next Page
Loading...
