Replace the empty toner cartridge with a
new one.
[Cancel]: Cancels color print data
automatically.
Replace the empty toner cartridge with a
new one.
Sets whether to reprint pages not printed
due to a paper jam after the paper jam is
cleared.
When [Off] is selected, the printing process
including pages missed due to the paper
jam will be canceled.
Prints the data received from the PC in
hexadecimal dump. To exit this mode, turn
off the power.
Adjusts the printing position of each tray.
• X Adjust: Corrects the position of the
entire print image perpendicularly to the
paper travel direction.
Value range: ±2.00 mm (in increments of
0.25 mm)
• Y Adjust: Corrects the position of the entire
print image along the paper travel direction.
Value range: ±2.00 mm (in increments of
0.25 mm)
• Duplex X Adjust: Corrects the position of
the entire print image at the right angle to
the paper travel direction for printing the
face side during duplex printing (when
printing the print side of paper fed from the
duplex unit).
Value range: ±2.00 mm (in increments of
0.25 mm)
• Duplex Y Adjust: Corrects the position of
the entire print image along the paper travel
direction for printing the face side during
duplex printing (when printing the print side
of paper fed from the duplex unit).
Value range: ±2.00 mm (in increments of
0.25 mm)
Tray 2/3/4 is displayed when the expansion
tray is mounted.
To Next Page
Loading...
