Printronix LP654C - Page 118

- 119 -
Item
Factory
default
settings
Description
Y Dimension (Fn32)
297
millimeter or
11.0 inch
*2
Sets the paper length when you have
selected a custom size for the paper that
you want to print on from Tray 3.
Media Type (Fn33)
Plain
Sets the type of the paper you want to print
on from Tray 3.
Media Weight (Fn34)
Light
Sets the weight of the paper you want to
print on from Tray 3.
Other Size
A5 [LEF]
Specifies the paper size when the paper
size dial of Tray 3 is set to [OTHER].
Tray4 Config
Paper Size (Fn40)
Cassette
Size
Sets the size of the paper you want to print
on from Tray 4.
For [Cassette Size], follows the settings of
the paper size dial of the paper tray.
X Dimension (Fn41)
210
millimeter or
8.5 inch
*2
Sets the paper width when you have
selected a custom size for the paper that
you want to print on from Tray 4.
Y Dimension (Fn42)
297
millimeter or
11.0 inch
*2
Sets the paper length when you have
selected a custom size for the paper that
you want to print on from Tray 4.
Media Type (Fn43)
Plain
Sets the type of the paper you want to print
on from Tray 4.
Media Weight (Fn44)
Light
Sets the weight of the paper you want to
print on from Tray 4.
Other Size
A5 [LEF]
Specifies the paper size when the paper
size dial of Tray 4 is set to [OTHER].
Paper Feed (Fn80)
Tray1
Specifies the paper feeding tray.
The settings of the printer driver take
priority.
Auto Tray Switch
On
Sets whether or not to use the auto tray
switch function.
The settings of the printer driver take
priority.
Tray Sequence
Down
Specifies the selection order of the tray
when the auto tray selection or auto tray
switching function is used.
Duplex Last Page
Skip Blank
Page
Sets whether or not to print the last 1-sided
page when the duplex printing is done on
odd-numbered pages.
Wireless(Infr
astructure)
Setting
Wireless(Infrastructure)
Disable
Switches the state (enabled or disabled) of
the wireless(Infrastructure).
Network
Setting
IP Address Set
Auto
Set to obtain the IPv4 address automatically
or set it manually.
IPv4 Address
192.168.101.
100
Input the IPv4 address manually.
Displayed when [IP Address Set] is set to
[Manual].
Subnet Mask
255.255.255.
0
Input the subnet mask.
Displayed when [IP Address Set] is set to
[Manual].
Gateway Address
0.0.0.0
Input the gateway address.
Displayed when [IP Address Set] is set to
[Manual].