Prodys ProntoNet - IP Diagnostic Codes

Prontonet User’s Manual v410 112
Code Meaning Code Meaning
55 No call suspended 62
Message not compatible with call state, or
not implemented
56
Call havin
g
the requested call identity
has been cleared
63
Information Element non-existent or not
implemented
57 User not a member of CUG* 64 Invalid Information Element contents
58 Incompatible destination 65 Message not compatible with call state
5A Non-existent CUG* 66 Recovery on time expiry
5B Invalid transit network selection 67 Parameter not implemented*
5F Invalid message, unspecified 6F Protocol Error, unspecified
60
Mandatory Information Element is
missing
7F Interworking, unspecified
61
Message type non-existent or not
implemented
 IP Diagnostic Codes:
Cause
Code Meaning
00 Start Status.
01 No answer from the remote unit.
02 Call rejected. The remote unit can be already busy.
03 Normal Disconnect from the remote unit.
04 Normal Disconnect from the local unit.