Prodys ProntoNet - IV.4.6 MPEG Layer III

Prontonet User’s Manual v410 34
SET ENCODER 1 >>
MPL2{MPL3}AAC2LC
MPEG SET BIT RATE
{64}128 192 256
MPEG SET MODE
{MONO}JS STER DUAL
MPEG SET Fs
{48}32 24
MPEG SET CRC
ON {OFF}
MPEG SET AUXDATA
ON {OFF}
IV.4.6 MPEG Layer III:
The configuration steps are:
1. Bit rate.
2. Mode: MONO, JOINT STEREO, STEREO or DUAL.
3. Sample rate: 48, 32 or 24 KHz.
4. CRC validation on/off
5. Auxilliary data on/off
NOTICE - MPEG Layer III RESTRICTIONS
 384 Kbps is not an option with MPEG Layer III.
 If NET = ISDN Bit Rate > 128 Kbps is not possible.
 If the Bit rate > 128 Kbps a 24 Khz sample rate is not possible.
O
K
O
K
O
K
O
K
O
K