Prontonet User’s Manual v410 7
Introduction
ProntoNet completes the Prodys audio codec family building on the features
provided in previous models. ProntoNet extends its performance possibilities as
dual audio codec by supporting MPEG 2/4 AAC LC, MPEG 4 LD and apt-X
TM
amongst its standard algorithms as well as bidirectional uncompressed audio
transmission over IP.
ProntoNet is also a Multi-network audio codec that can be used in different
industry standard types of communication networks:
Standard ISDN 1-BRI universal terminal adapter (U or S/T).
X21 port, connects to synchronous data transmission links (dedicated lines).
LAN connector, 10/100 Ethernet interface for audio transmission and control.
About this manual
The information is arranged in the following sections:
Chapter II – Installation Guide.
This chapter provides hardware requirements and instructions for installing
the ProntoNet unit.
Chapter III – The Front Panel.
ProntoNet can be configured and controlled from the controls located on its
frontal panel. This chapter describes all of the features and controls of the
ProntoNet Front panel.
Chapter IV – The menu.
This chapter describes how to use the front panel buttons and LCD screen to
move through the menus. It describes each menu path and its associated
options and parameters.
Chapter V – The remote control.
ProntoNet can be controlled from a Web Browser. This chapter describes how
to start it and how to use it.
Chapter I
To Next Page
Loading...
