Prodys ProntoNet - IV.4.9 Aptx; IV.4.9.1. Std Aptx

Prontonet User’s Manual v410 37
<< SET ENCODER 1 >>
AC4LC AAC4LD{APTX}
APT-X SET BITRATE
{64}128 192 256 384
AAC SET MODE
{7.5MN}
AAC SET AUXDATA
ON{OFF}
SET ENCODER APT-X
{STD APTX} ENH APTX
SET ENCODER APT-X
{STD APTX} ENH APTX
IV.4.9 aptX:
The aptX menu allows the selection of Standard aptX or Enhanced aptX.
IV.4.9.1. STD APTX:
The configuration steps are:
1. Bit rate.
2. Audio mode.
3. Auxilliary data on/off.
These are the available options:
a) 64 Kbps Æ Mono 7.5 KHz.
b) 128 Kbps Æ Stereo 7.5 KHz o Mono 15 KHz.
c) 192 Kbps Æ Mono 20 KHz.
d) 256 Kbps Æ Stereo 15 KHz.
e) 384 KHz Æ Stereo 20 KHz.
O
K
O
K
O
K
O
K