Prodys ProntoNet - IV.4.8 Aac Ld

Prontonet User’s Manual v410 36
<< SET ENCODER 1 >>
AAC4LC{AAC4LD}APTX
AAC SET BIT RATE
{64}128 192 256 384
AAC SET MODE
{MONO}
AAC SET Fs
{48}32 24
AAC SET CRC
ON {OFF}
AAC SET AUXDATA
ON {OFF}
IV.4.8 AAC LD
The configuration steps are:
1. Bit rate.
2. Mode: MONO.
3. Sample rate: 48, 32 or 24 KHz.
4. CRC validation on/off
5. Auxilliary data on/off
NOTICE - AAC LD RESTRICTIONS
 If NET = ISDN Bit Rate > 128 Kbps is not possible.
 If the Bit Rate >256 Kbps, a 24 KHz sample rate is not possible.
O
K
O
K
O
K
O
K
O
K