Prontonet User’s Manual v410 83
V.2.4 Disconnecting the Line:
By clicking in the right side of the Connection area
V.2.5 Line Status:
The Line status is shown on the right side of the Connection area
These are the different status messages which can be displayed:
“No physical Line”: The communication line is not physically detected. Most
likely the interface is not plugged in. The Display shows “DOWN”.
“Connected”: The line is connected. An arrow will indicate if it is an incoming
or outgoing call.
The duration of the call also is indicated (Available since version 3.6.0).
“Disconnected”: The line is detected physically but no connection is being
made. Beside the text appear the disconnection codes.
To Next Page
Loading...
