Prontonet User’s Manual v410 82
Call types:
¾ Unicast Bidirectional Æ This is a bidirectional point to point connection,
that is, both ends will transmit and receive audio simultaneously. It will be
necessary to check the upload and download bandwidth in the link.
¾ Unicast Unidirectional Tx Æ This is a unidirectional point to point
communication where only the end which makes the call will send audio.
¾ Unicast Unidirectional Rx Æ This is a unidirectional point to point
communication, where the calling end will be the receiver.
¾ Multicast Tx Æ This is point to multipoint communication in which the
calling end will join a multicast group as a transmitter.
¾ Multicast Rx Æ This is point to multipoint communication in which the
calling end will join a multicast group as a receiver.
These options have been modified in previous versions. Please check the
"Prontonet What's new" documentation for exact details for any particular
version.
The user can enter the IP address or can select an index from the Phone Book.
The encoder can be configured from this dialog as well.
If NET X21, we can connect or disconnect the X21 port.
To Next Page
Loading...
