Prodys ProntoNet - IV.4.9.2. Enh Aptx

Prontonet User’s Manual v410 38
ENH APT-X SET BRATE
{64}128 192 256 384
ENH APT-X SET MODE
{7.5MN}
ENH APT-X SET AUX
ON{OFF}
ENH APT-X SET NºBITS
{16} 20 24
SET ENCODER APT-X
STD APTX {ENH APTX}
IV.4.9.2. ENH APTX:
The configuration steps are:
1. Bit rate.
2. Audio mode.
3. Auxilliary data on/off
The bit rates will be different depending on the selected number of bits and
the NET configuration
 NET = IP:
apt-X Enhanced
Fs Mode
16 bits 20 bits 24 bits
16 kHz 7.5 mono 64 kbps - -
16 kHz 7.5 stereo 128 kbps - -
32 kHz 15 mono 128 kbps 160 Kbps 192 kbps
32 kHz 15 stereo 256 kbps 320 kbps 384 kbps
48 kHz 20 mono 192 kbps 240 Kbps 288 Kbps
48 kHz 20 stereo 384 kbps 480 Kbps 576 kbps
O
K
O
K
O
K
O
K