Prodys ProntoNet - IV.4.2 Pcm; IV.4.3 G711; IV.4.4 G722

Prontonet User’s Manual v410 32
SET ENCODER 1 >>
AUT{PCM}G711 G722
PCM SET MODE
MONO{STEREO}
PCM SET NºBITS
{16} 24
PCM SET FS
{48}
SET ENCODER 1 >>
AUT PCM{G711}G722
G711 SET LAW
{A-LAW}μ -LAW
IV.4.2 PCM:
The configuration steps are:
1. Mode: MONO or STEREO.
2. Number of bits: 16 or 24 (available since 3.0.8 version).
3. Sample rate: 48 KHz.
IV.4.3 G711:
If we select G711 we can choose between A law or Mu Law.
IV.4.4 G722:
Without parameters to configure.
O
K
O
K
O
K
O
K