Prontonet User’s Manual v410 51
<<BOOK INDEX[01] >>
RS232 DATA MENU
{OFF}DEC1 DEC2 BOTH
GPIO DATA MENU
{OFF}DEC1 DEC2
KEYS LOCKED
PRESS OK AND THEN *
It is possible to enable independently the RS232 port and the GPIO port.
There are DEC1 and DEC 2 in case the ProntoNet works as dual codec.
KEYPAD: This option allows to enable/disable automatic keypad locking.
When enabled, the unit will automatically lock keys from the front panel, one
minute after last key was pressed. To unlock, just press OK and * keys.
INF won’t be disabled.
CALL1 and CALL2 keys will be available to answer any incoming call.
When the keypad is locked, and any key is pressed, the following message
appears:
IV.6.4 CONF-BOOK:
This is where you edit Address Book entries. There are three fields for each
entry – number/numbers (max 2) to call over ISDN, IP address for connecting
to, and the Encoder modes for Encoder 1 and/or 2. There are a total of 32 entry
slots available. Once you have selected BOOK from the menu you program
entries in the following way:
Firstly, you must select one of the entry positions with the right/left keys:
To Next Page
Loading...
