Prontonet User’s Manual v410 52
BOOK INDEX[01]
{EDIT} DELETE
BOOK EDITOR [01]
{ISDN}IP ENC1 ENC2
L1:-
L2:-
IP1:-
IP2:-
E1:MPL3-128-MN-48
{CHANGE}
Pressing OK you enter the selected entry slot, and from here you can add or
modify data using EDIT, or delete data using DELETE.
On pressing EDIT the different fields appear for editing:
ISDN: This option allows you to enter the number/numbers to be called over
ISDN for this Address Book entry. The call will be made on the
communications line corresponding to where the number has been saved.
IP: This is where you add the IP address you wish to call when this entry is
chosen from the Address Book.
You can only enter ISDN numbers OR an IP address for each entry in
the Address Book. You cannot have an entry that has both ISDN
numbers and IP addresses at the same time.
ENC1 and ENC2: Here you can select the algorithm that will be set up for
Encoder 1 (or Encoders 1 and 2) when an entry is selected from the Address
Book. By selecting, the algorithm currently configured the display will show
the options available to change it (CHANGE).
To Next Page
Loading...
