Prontonet User’s Manual v410 59
¾ Automatically Æ Check “Obtain an IP address automatically” option to get
the configuration automatically from a DHCP Server.
By setting DHCP, the unit will receive its IP parameters when starting. These IP
settings might be different from time to time, that is why ProntoNet supports
RIP2 protocol. This protocol allows the user to set an ‘internal’ IP address, in
order that the unit can be identified regardless of the IP settings provided by the
DHCP server. This option is available from version 4.0.1.
V.1.1.2. ISDN Terminal adaptor Configuration
The first dialog allows the selection of the ISDN protocol. There are four options:
Euro-ISDN, 5ESS, DMS 100 and NAT1:
To Next Page
Loading...
