Prontonet User’s Manual v410 48
SET LOOP
{CODEC1}CODEC2
SET PLL
{IP}X21
SYS MENU »
{LOOP}PLL BACKUP FAN
« SYS MENU
BACKUP FAN{AUXDATA}
BACKUP MENU
{MODE}ENABLE TIMER
IV.6.3 CONF-SYS:
Grouped here are functions that affect the general operation of the unit.
Loop: This sets up an Encoder-Decoder loop. Its purpose is to help the user
when there are installation problems. The loop takes place in accordance
with the configuration available at that moment:
PLL: This is a special option that allows you to select the PLL reference clock
when NET = IP.
This is only available when NET=IP.
BACKUP: Backup configuration menu. To get more information about the
Backup operation, please, see “how the backup works” in the chapter VI.
This option is only available if NET=IP or NET=X.21
To Next Page
Loading...
