ProntoNet
What’s New
38
Beginning from this version it is possible to select between the left channel
L or L+R as audio source of the encoder 1, and R or L+R as audio source
of the encoder 2.
This option is only available from the ProntoNet web page.
Encoding L+R as a mono signal instead of L and R separately as stereo allows to transmit
the audio signal with more bandwidth when the ISDN link is only 1 B channel, that is 64
Kbps.
ENC
STE
L
R
IP
X21
DEC
STE
L
R
ENC
MN
L
R
RDSI backup
DEC
MN
L+R
+
L+R
N
The encoder mode of the slave (backup configuration) can be
configured.
In previous versions, the slave worked in backup with the same encoding
mode selected for the main communication line (IP or X21) when such
algorithm was compatible in an ISDN communication. Otherwise, the
encoding was configured in MPEG L2 64 Kbps by default.
N
It is possible to save the configuration of the unit in a file.
To Next Page
Loading...
