Device Manual CANlink wireless
Getting started
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0 58
© 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016 PROEMION GMBH > 1.0 EN > Device Manual CANlink wireless 3000 series
CONFIGURATION OF THE CAN-CAN-BLUETOOTH BRIDGE MASTER
1. Connect the device to the PC. See chapter Connecting the device with a PC via
RS232.
2. Read out the device information from the CANlink wireless and save the current
configuration. See chapter Saving the device configuration.
3. Choose F
ILE → NEW CONFIGURATION from the menu.
The default parameters for a configuration are loaded.
4. Choose D
EVICE → DEVICE INFORMATION… from the menu.
The device information is displayed.
5. Make a note of the device serial number.
6. Click the B
LUETOOTH tab.
7. In the A
UTOMATIC BLUETOOTH CONNECTION field, check the ENABLE box.
To Next Page
Loading...
