Device Manual CANlink wireless
Getting started
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0 59
© 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016 PROEMION GMBH > 1.0 EN > Device Manual CANlink wireless 3000 series
8. In the DEVICE NAME field, add the serial number of the CANlink wireless master.
9. In the A
UTOMATIC BLUETOOTH CONNECTION field, check the ENABLE box.
10. In the B
LUETOOTH MAC ADDRESS field, enter the Bluetooth MAC address of the
CANlink wireless slave.
11. Select the D
EVICE tab.
12. Alter the configuration of your application to match the target system. In particular,
adapt the CAN baud rate to the target system.
To Next Page
Loading...
