Device Manual CANlink wireless
Getting started
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0 75
© 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016 PROEMION GMBH > 1.0 EN > Device Manual CANlink wireless 3000 series
15. Enter the following parameters for the Indicator:
Name Entry
Generator Name Indicator CV
ID 123
Data Type UInt8
First Data Byte to generate Byte 1
Choose Indicator Graph
Indicator CV paramters
16. Click the OK button to confirm the parameters.
17. Connect the CANlink wireless to your network. See chapter Operation as a CAN-
WLAN Interface.
NOTICE
The following step is only necessary if you have not allocated a fixed IP address to the
CANlink wireless.
18. Identify and make a note of the IP address of the CANlink wireless from the DHCP
overview in the router parameters..
NOTICE
Enter the router's IP address into the browser of the PC in order to access the router
parameters. Navigate to the DHCP overview.
Follow the instructions in the router manual.
19. Connect this or a second PC to the WLAN network.
To Next Page
Loading...
