Device Manual CANlink wireless
Getting started
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0 76
© 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016RM MICHAELIDES● VX.X ● Device Manual CANlink 5000 series © 2016 PROEMION GMBH > 1.0 EN > Device Manual CANlink wireless 3000 series
20. Start RM CAN-Device Monitor on the second PC.
21. In the menu, click the T
OOLS button.
22. Click the C
OMM SETTINGS tab.
23. In the list under C
ONNECTION TYPE, select the Interface TCP/UDP.
24. In the IP box, enter the IP address of the CANlink wireless from the DHCP overview.
25. In the P
ORT box, enter the value 30000.
The device logs on.
To Next Page
Loading...
