RLX2 Industrial Hotspot Series
Page 36 of 212 ProSoft Technology, Inc.
June 15, 2015
If the display is different than above, use the IH Browser toolbar controls to clear and
refresh the display:
The “erase” tool clears the display
The “search” tool rescans the network for RLX2 radios
If no radios appear in the list, see Section 0 on troubleshooting missing radios.
4. In particular, note the line listing the MAC address of the RLX2 radio. If the radio is
on a network with a DHCP server, it will obtain an IP address via DHCP. If not, the
radio will appear with an IP address of 0.0.0.0 as shown above.
5. Assign the RLX2 a valid IP address for the network. Do this by right-clicking on the
radio’s row in the IH Browser display and selecting Assign IP from the context menu.
To Next Page
Loading...
Need help?
General
