MVI56-PDPMV1 ♦ ControlLogix Platform Configuring the MVI56-PDPMV1 Module
PROFIBUS DPV1 Master User Manual
Page 97 of 251 ProSoft Technology, Inc.
If no slaves are found a message similar to the one below will appear. The same
message will also show up if no slaves are found during the initial scan (for
example when selecting SCAN NETWORK from the Online menu).
Adopt selected slaves
Pressing this button will cause all selected slaves to be adopted to the
PROFIBUS Master Configuration window. Before carrying on with this action a
message similar to the one below will appear.
To Next Page
Loading...