Figure 8.3.3D
7. Click on the “Ok” button and then on the “Save” button. The macro is
created.
8. Once the required macros are added, save changes. If you are not
logged as admin, you will need to authenticate in order to save them.
New macros will appear in “Cinelister”.
9. To check in advance the macros, use the “MACRO EXECUTION” pro-
gram in the “CONTROL.” menu. You can see a snapshot of the “Macro
Execution” program in figure 8.3.3E.
Figure 8.3.3E
INSTALLATION MANUAL: PAA20+ V 2.0 (10/2021) 73
To Next Page
Loading...