How to Display and Change to 'No Account with Access
Control' Mode
No Account With Access Control
• Postage usage is not tracked by account.
• User does not select an account when processing mail.
• A PIN number is required to access functions and process
mail.
• In this mode there is a shared System PIN Code.
To display and change the 'Account mode' to 'No Account with Access Control':
1. From the home screen:
Press and select the path: Account Management
The Login screen is displayed.
Enter the Supervisor PIN code and press [OK].
2. Select Account Mode Selection.
The Account Mode Selection screen is displayed with the current 'Account Mode'
shown.
112
| Page 112 | Jun-21-2021 09:24 |
6
Accounts and Access Control
To Next Page
Loading...
